Interior Xenons

Messages
9
Likes
0
#1
I figured out how to keep the interior xenons from melting. I put them in two weeks ago and found that the license plate bulb covers were melted and bubly in the center. [?|] However, the plastic around the melted part was hard as rock. In order to keep the hotter bulbs from melting stuff, you have to ease the plastic into it. (This worked on the interior plastic but don't blame me if the bulbs hate you [}:)] ). Leave the bulbs on for about 5 min. Let them cool. Next time leave them on for a bit longer, 5 to 10 is good. Slowly increase the time on and eventually the plastic should have melted slightly but hardened in the process. It worked for me. Might just work for you. [|)]
 
Messages
447
Likes
0
Location
NJ
#3
interior xenons sounds a lil overkill to me...ive always been more of a fan of the LED variety lights....thats a quality lighting[:D]
 
Messages
9
Likes
0
#4
I like the interior xenons because they give a very crisp, white light that matches the headlights. I don't think it really illuminates any better than stock.
 


Top